In this era of technology, a drone is a general term for aircraft that can fly unmanned by remote control or automatic control. It is now massively well-known as the “Industrial Revolution in the Sky.” Even now, it is already being used for aerial photography of photographs and videos, an inspection of factories, buildings, solar panels, surveying at construction sites, remote sensing in fields, etc.
Its continuity, making drone is the most trending Sky revolution facts due to the high demand among peoples. A drone has become more efficiency and labor-saving indispensable in all fields. Making a drone is slightly tricky, but it’s easier than you think due to the pre-made drone frame cutting. With advantage, you can make any kinds of drones such as toy drones, industrial drones, and military drones.
Frame:
To making any kinds of products, the most vital equipment frame. If you can build a better structure, than you can get a better experience. Making the drone the most crucial parts build a drone body; for that, you need a carbon fiber drone frame cutting. It has many 4-motor quad copters, and the size of the frame is indicated as a numerical in the frame name.
Essentially, this number’s meaning is the length (mm) between the diagonal motors, and the size is more exhaustive. The larger the size, the more parts such as a large capacity battery and high output motor can be loaded. But, you need to be careful because the weight will increase accordingly. The frame is made of inexpensive nylon and expensive but strong carbon.
Motor:
To build a drone, you need a part that is the primary basis to control aerodynamic. In that case, the motor is a part that converts electrical energy into the force that the propeller rotates. Thereby the drone gains the energy to overcome the aerodynamic force.
Indeed, drones attach propellers directly to the motors, so one propeller requires one motor. When making a drone, it is crucial to consider the aircraft’s weight and the balance with the propeller and ESC (Electronic Speed Controller) to be used.
Distribution board:
The role of the distribution board is to distribute the power of the battery to each part. It is often bundled with a frame, but some have their own shape, weight, and BEC (Battery Eliminator Circuitry, step-down). It is common to supply power directly to the flight controller, receiver, ESC, motor, etc. or by using BEC, etc., after stepping down.
Propeller:
A propeller is producing lift from the rotation of a motor. There are many types of propellers, such as length, pitch, material and color. The shape looks the same, but the direction of the propeller pitch angle is different for each direction of rotation, such as CW (clockwise) and CCW (counterclockwise).
Battery:
Lipo batteries are the mainstream for drone batteries. Their large capacity and high output characterize lipo batteries. It is a hazardous battery if you mishandle it, so be careful when handling the drone.
Flight controller:
The flight controller is a part of the starting point, switching various sensors and transmitting the radio signal when operating the drone to the motor. There are many types of flight controllers, each with its own characteristics, and the setting method is also different.
ESC (amplifier):
It is a part of adjusting the rotation speed of the motor. It has the role of receiving the signal from the flight controller and sending the motor’s control signal. You will need one of these parts for each motor.