After setting up a Netgear WiFi range extender, you can access an extended network range and speed throughout the home or office. But sometimes, the extender starts malfunctioning and causes the intermittent or dropped internet connection. Aside from that, you can also face other issues with your Netgear extender such as unexpected shutdown, extender not working, internet connected but no WiFi connection, etc.
So what’s the solution?
Prior to buying a brand new range extender, try resetting it. Restoring all the factory default values of the extender can make it as good as a new one. In order to reset Netgear extender, you need to access mywifiext web GUI.
Don’t know how to factory reset Netgear WiFi range extender? Well, no need to worry at all.
This post will give you point by point guidelines to take care of business. please read the below instructions.
Things to Know Before Netgear Extender Reset
If you want to complete the factory reset process without any technical issue, So, please read given below tips will be extremely useful to you. Execute them individually and make the reset procedure simpler and issue free.
1. Find a Suitable AC Wall Plug
Never under any circumstance associate your WiFi promoter by means of an extender line whether you are performing Netgear extender arrangement or designing the extender. Besides, abstain from utilizing broken and free or spotty cable.
Asking for what reason is it significant in resetting the extender? Gotcha! You should realize that any harmed or free connection may disturb the extender’s capacity supply. Further, it can break the introduced firmware or degenerate its memory.
2. Power on the Range Extender
After restarting your WiFi range extender, wait for some minutes and let it boot up appropriately. if you meddle with the booting procedure, you may different issues as well.
3. Note Down the Setting Changes
Note Down the Setting Changes
Make a note of all the changes you do in the settings of your Netgear extender. The rundown incorporates channel numbers, WiFi system name (SSID), passphrase, security alternatives, and etc. This is why you need these settings in the wake of resetting your range extender to the default industrial facility settings.
Factory Reset Netgear Extender Using Mywifiext
As you utilize the default web GUI of Netgear extender for resetting, so this procedure is known as delicate reset.you need the following things in hand:
- A Netgear WiFi extender
- A PC or other any Device
- An Ethernet cable
When you have every one of these things, begin with the reset procedure:
Step-1: Connect Your WiFi Extender to Computer
- Plug in your extender to an electrical outlet.
- Take an Ethernet wire and connect the extender to a PC or workstation.
When the association has been made, go to the following stage.
Step-2: Log in to Netgear Extender’s Admin Web Page
- Once the extender boots up, open an internet browser window.
- In the location bar, type 192.168.1.250 IP and press enter key to sign in to your extender’s settings page.
- After that, enter your default login details.
Finally, click on the login button.
Step-3: Find the Reset Button
- Now you are on the Netgear genie setup dashboard.
- Find the reset button under the settings menu.
- Once found, click on it.
- A prompt opens. press on yes button.
This procedure takes your Netgear WiFi extender disconnected during the reset procedure.
Step-4: Extender’s Factory Reset Completes
While resetting the extender, all the LED lights will be off. Hold up until they all become showing again.
That is it! Your Netgear extender has been reset completely. Now, you can configure it similarly as you did after the initial Netgear extender Setup.