Would you like to keep your drinks fresh, cold, and fragrant? Then you can’t do without reach in beer coolers – cooling equipment designed to maintain the perfect temperature of your beer.
After reading our article, you will learn about this type of equipment, how it differs from other refrigerators, and where to find equipment that will satisfy your institution’s unique needs.
What is a reach-in cooler?
Reach-in coolers are refrigeration equipment commonly found in commercial kitchens in restaurants, bars, breweries, or other catering establishments. These refrigerators are designed to facilitate access to food and are equipped with shelves or boxes to organize and store products at the right temperature.
How do reach-in coolers work?
The equipment consists of a compressor, capacitor, evaporator, and expansion valve.
- The compressor creates pressure in the refrigerant gas, which then enters the condenser, condensing into the liquid under high pressure.
- This liquid refrigerant enters the evaporator inside the cooler, expands, and absorbs heat from within, cooling air and products inside the cooler.
- The cooled air then circulates throughout the refrigeration cabinet, maintaining a constant temperature to preserve stored items.
In addition, refrigeration cabinets are often equipped with adjustable temperature control, ensuring that beverages are stored at the optimal temperature for freshness and safety.
What is the difference between a walk-in cooler and a reach-in cooler?
The main differences between walk-in cooler and reach-in coolers lie in their design, size, and functionality:
- Commercial reach-in coolers have a vertical or horizontal design with doors that allow users to open the refrigerator and access stored drinks without going inside. They are ideal for storing small amounts of products.
- Walk-in coolers are larger refrigerators ranging from a small room of 6 by 6 feet to a refrigeration warehouse of any size. They are designed to store large amounts of products.
What temp should reach-in coolers be?
The optimal temperature for cooling a beer ranges from 35°F to 38°F (from 1.6°C to 3.3°C).
This temperature range guarantees the preservation of the taste and quality of the beer during its storage or dispensing.
What is the life expectancy of a reach-in cooler?
The expected service life of a refrigerator may vary depending on several factors:
- The quality of the device itself: production materials, the quality of the assembly, etc.
- Trademark.
- Usage frequency.
- Level of maintenance.
As a rule, a good commercial refrigerator can last 10 to 20 years. However, regular maintenance, such as cleaning the coils, checking the door seals, and maintaining proper temperature control, can significantly extend its life.
Why is my reach in cooler freezing up?
The problem may arise for several reasons:
- Defrost system troubles. If the defrost timer, heater, or thermostat fails, it can lead to excessive ice accumulation on the coils.
- Low refrigerant or faulty compressor can also lead to insufficient heat transfer and ice formation inside the cooler.
- If the coil drain line is clogged, water vapor will accumulate, causing problems with icing around the drain or on the coil itself.
To avoid all this and prolong the life of your refrigeration equipment, you need to maintain your device regularly, including cleaning the coils, testing defrosting components, and controlling refrigerant level.
How do you clean the coils on a reach in a cooler?
To effectively clean the coils, follow these steps:
- Turn off the cooler.
- Find the coils. They are located behind the top or bottom of the cooler panel.
- Carefully vacuum the coils to remove all visible debris.
- For more persistent dirt, use the Coil Cleaning Brush. Make sure the bristle is soft to avoid damaging the coils.
- Apply a non-aggressive coil cleaner according to the manufacturer’s instructions.
- After cleaning the coils, let them dry out completely.
- Connect the device to the network and let it cool for a few hours. Monitor the temperature to ensure the cleaning process has not affected its functionality.
Looking for high quality reach-in beer coolers for sale? Look no further than UBC Group USA! Here, you will find a large selection of cooling equipment of different sizes and functionalities, so you will find exactly what will suit your production needs.
To get access to wholesale prices and place orders, register on the website of UBC Group USA: competent brand consultants will gladly help you with the choice, and prompt delivery ensures that your goods will be sent to you within 24 hours from the moment of placing the order!