Line Driver AD8324ACPZ: Why We Use a Line Driver?

Introduction of AD8324ACPZ Line Driver

The AD8324ACPZ is a line driver. It is an affordable cost amplifier that is designed to drive coaxial lines. Its gain is controlled digitally. It can accept an input single-ended or differential signal. More information about differential line drivers is available below. The output is intended to drive a 75Ω load via a 1:1 transformer. The device comes with the sleep mode feature which reduces the quiescent current to 30μA, and an all-power-down feature that reduces the power-down current to 2.5mA. It is powered by only a single 3.3 V power supply.

What does a differential line driver do?

The differential driver can be employed to improve the level of noise-proofing. A differential line driver lets you source or sinks more current than the Totem Pole output. It works using a sinking and source circuit.

Features

Gain is programmable by 1 dB increments over the 59 dB range.

Maintains 75Ω  output impedance in the transmit-enable and transmit disable conditions.

The higher bandwidth of 100 MHz

3.3 V Supply Operation

Diagram

Specifications

Supply Chain

Factory Lead Time – 8 Weeks

Physical

Number of Pins – 20

Technical

Max Operating Temperature – 85°C

Min Operating Temperature –   -40°C

Circuits of AD8324ACPZ Line Driver

Alternative Models

ADA4850-2YCPZ-RL7, ADA4850-2YCPZ-R2, AD8328ACP

Where to Use AD8324ACPZ Line Driver?

It is general use and is suitable for the application in CATV set-top boxes, CATV telephony modems, and as well as coaxial and twisted pair line drivers.

How to Use AD8324ACPZ Line Driver?

Why We Use a Line Driver?

In cable modems as well as CATV set-top boxes, high-performance analog circuitry is crucial to the operation. Line drivers may exceed the output voltage capabilities of standard emitter-follower output stages. The line driver ic is an electronic amplifier circuit designed to be used for controlling a load, such as a transmission line. The amplifier’s output resistance can be adjusted to match the resistance of the line.

The line driver ic is a set of transistors that are packaged inside an IC which allows several higher power outputs to be controlled from your low-power project. Since they are just sets of transistors, they are either sinking or sourcing power.

Except as mentioned above, we also see an audio line driver in our life

What is an audio line driver?

Audio line drivers are electronic amplifier circuit that was designed to drive a load, like a transmission line. In the field of analog audio lines, an audio line driver is usually utilized to drive line-level analog signal outputs, like connecting a CD player into an amplified audio speaker.

Pats with Similar Specs

 

Package Dimensions

 

 

About the Manufacturer

Analog Devices is an international market leader in the design, production, and commercialization of a large range of high-performance integrated circuits (ICs) for analog, mixed-signal, and digital signals (DSP) processing of almost all electronic systems. Since we started in 1965, the focus has been on the engineering challenge in electronic equipment related to signal to process. Our signal processing solutions, utilized by over 100,000 customers worldwide, play a key role in the conversion, conditioning, and processing of real-world events such as temperature, pressure, sonority, illumination, speed, and movement to electric signals for a wide range of electronic devices.

Datasheet

https://pdf.easybom.com/r/datasheets/analogdevicesinc-ad8324jrqzreel-datasheets-8632.pdf

Popularity by Region

 

 

Trend Analysis

 

Conclusion

The AD8324ACPZ line driver is an affordable cost amplifier that is designed to drive coaxial lines. Its gain is controlled digitally. It can accept an input single-ended or differential signal. It is general use and is suitable for the application in CATV set-top boxes, CATV telephony modems, and as well as coaxial and twisted pair line drivers.

 

Leave a Reply

Your email address will not be published.