Home Gadget Netgear Extender Stopped Working after Power Failure! What to do?

Netgear Extender Stopped Working after Power Failure! What to do?

7 min read
0
194

Has your Netgear extender stopped working after sudden power failure? If you nod in yes, you have reached at the right post. Here, in this how-to tutorial, we will make you aware with some best solutions that will help you get rid of Netgear extender not working after power failure issue. Keep reading!

Sudden power failure will shut down everything that runs on electricity. For instance, if you are trying to chance the extender’s settings via 192.168.1.250 or www.mywifiext.net, sudden power outage won’t allow you to do anything and might delete the changes made by you. However, power outages can also slow down the internet speed. If you are living in an area where power cuts every day, then it might makes your internet connection unstable. As a result, your Netgear extender may also stop working.

So, to make your Netgear WiFi extender up and running after sudden power outage, walk through the troubleshooting fixes highlighted below.

Power Cycle your Netgear Extender

The power cycle will refresh your WiFi range extender. So, after sudden power outage, power cycling your Netgear device would be a good decision to consider.

How to Power Cycle Netgear Extender?

To resolve Netgear extender stopped working issue after sudden power outage, here’s how to perform the power cycle process:

  • Wait for the electricity to become stable.
  • Confirm whether your Netgear extender is powered on.
  • Also, provide your Netgear extender a steady power supply.
  • Now, locate the power i.e. on/off button on your Netgear extender.
  • Push it and wait for 10-15 minutes.
  • Turn your Netgear extender on and wait for the power LED to become stable.

To check your internet speed after the power cycle process, have access to mywifiext.net If it redirects you to Netgear Genie setup wizard in minutes, then your internet is working fine. Else, you need to try the next fix highlighted below.

Reset your Netgear WiFi Extender

Consider this legit solution as the last restore. Resetting your Netgear extender back to default values can fix issues that the device may have experience after sudden power outage. After the Netgear extender reset process all the customized settings made you will be deleted and you have to configure it again. Here’s how to reset Netgear extender.

  • Provide your Netgear extender a steady power supply.
  • Also, disconnect your extender from your main router, computer, laptop, and mobile devices (if connected).
  • Find the reset hole on your Netgear WiFi extender.
  • Take a pin or paper clip and push the extender’s reset hole with it.
  • Allow your extender to reboot.

So, these were the instructions to reset Netgear extender back to default factory settings. Now, it’s time to reconfigure your device and fix Netgear extender stopped working suddenly issue.

How to Reconfigure Netgear WiFi Range Extender?

Follow the steps highlighted underneath to configure your Netgear WiFi range extender after the reset process.

  • Ensure to provide your Netgear extender a steady power supply during the setup process.
  • Power on your Netgear extender.
  • Take an Ethernet cable and inserts its one end to the router and other end to the extender.
  • Turn on any WiFi-enable device and launch an internet browser of your choice.
  • Head over to the address bar and enter mywifiext into the address bar and hit the Enter key.
  • On Netgear Genie Setup wizard, enter the extender’s username and password.
  • Click on Log In.
  • Go through the on-screen instructions, keep clicking on positive responses until it ask you – click on Finish to complete the setup process.

Important

If you can log in to extender and see error pop-up, make sure that you are using the right domain. Mywifiext.net is universal while mywifiext.local is for Apple device or iOS users. So, if you have a MacBook or an Apple device, you should use mywifiext local web address in order to avoid log in issues.

Done! Your Netgear WiFi range extender has been configured successfully. Even after following the aforementioned steps, you can’t make the most of your Netgear extender, it is better to take assistance from our expert technicians.

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also

How to Fix Error Code 48 in Device Manager?

Device Manager is one of the useful utilities that the Microsoft Windows operating system …