Painting newly plastered walls is necessary for completing your home renovations successfully. Nobody wants to live in the disruption of a half-finished paint project. Hence, it is natural for wanting to get things done with the job as soon as possible.
While it can be frustrating to live in the chaos, rushing ahead with new plaster painting could make things worse in the long run. When your walls are newly plastered, they are going to be full of moisture. If you add paint on top of that, it will form a seal that won’t allow the water to evaporate naturally.
Excess moisture could create a lot of problems. When the water reacts with salts in bricks, it could damage your walls and ceiling easily. The best way to have smooth walls would be to wait until the plaster dries out. And after it finally dries out, you can go ahead and hire painting services in Hyderabad for painting new plaster.
If you are looking for a more cost-effective solution, you can get the job done by yourself. However, you need to know the right practices and methods necessary for plaster painting.
There are several things that you have to consider. You might find a lot of conflicting advice online, which clearly doesn’t seem to help. In order to make things easier, we are going to mention a few things you should keep in mind while you engage in new plaster painting.
#1 – Seal It
The first step would involve you sealing the new plaster in order to make it less absorbent. It will help in making the topcoat adhere better to the walls and ceiling.Most people prefer sealing with watered-down emulsion (also called mist coat) before beginning the wall or ceiling painting. By doing so, the plaster will become less absorbent and lay a proper foundation for a fresh coat of paint.
#2 – Apply Watered-Down Emulsion
It can be challenging to work with watered-down emulsion as it drips more often than the standard versions. Make sure that you brush-out, roller, or wipe drips immediately to ensure a smooth finish. As the plaster is absorbent, the paint will dry very quickly.
If you are using a white topcoat, you should use a watered-down emulsion. Otherwise, you will have to apply more coats of topcoat that necessary.
#3 – Be Careful with White Topcoat
Painting new plaster with white topcoat could result in patches of plaster, requiring several coats for coverage. If these patches appear, you can use a basecoat emulsion or stain block to save paint and time. You will find some great options on the market. A good basecoat will be able to seal the plaster and fill hairline cracks, which can appear on newly plastered ceilings and walls, especially after plaster painting.
#4 – Use Specialist Paints
You can find paints that can be directly applied to base plater in DIY stores. However, they are more expensive than watering down emulsions. Despite that, people like using these paints because they do not drip.
However, amateurs might have a hard time getting an excellent finish using these paints. Therefore, you should use this option only when you have no other choice than painting on plastered walls.
#5 – Deal with Damp
Damp could prevent certain patches of plaster from drying. The best way to deal with the situation would require you to remove the plaster and do a waterproof render before you can start plastering again. Make sure that you address the cause of the damp beforehand.
Did you have your walls plastered recently? Keep these few things in mind, and you won’t have trouble getting a flawless finish for your walls.