Many businesses find sewage to be an unwelcomed by-product of their operations that must be managed, in order to release it in accordance with local regulations and avoid paying hefty fines, and harming the environment.
Many times, a system has been in existence since the beginning, but sadly, it is frequently unsuitable for its intended use. The system might eventually need to be completely replaced, and a number of difficult decisions must be made as a result.
Choosing the right sewage treatment plant: 5 things you need to know
Let’s try to break this down because there are many variables that could affect the answer, to this question. The most crucial factors to take into account while looking at a sewage treatment plant (STP) design are:
- PURPOSES AND OBJECTIVES
The major objective of designing a STP process is typically to reduce the volume, toxicity, and final treatment residue, because final disposal can be very expensive and risky. It will be much simpler for you in the long run, if you comprehend the project’s purpose and objectives, before choosing the preferred sewage treatment method and service.
- CONSIDER AN ESSAY OF TREATABILITY
Treatability studies are crucial to the process of choosing a solution for both new and upgraded plants. Small-scale, inexpensive tests that are often carried out in a lab might provide important information, on how proposed solutions will function in practice.
They can be used to compare potential technologies and identify the best solution, because they take into account site-specific variables using sewage from the field.
- TECHNOLOGIES USED
Choosing the proper technology can be challenging, especially if you lack the necessary skills or are entirely dependent, on the Original Equipment Manufacturer (OEM). Your life will be much simpler if you have performed a treatability research, but even so, there is still hope because the OEMs should have the necessary knowledge, to provide a workable solution for your application.
The following should at the very least be taken into account, while choosing manufacturer technologies.
Experience that is published
What car would you choose if you had to choose between a Toyota and an unidentified brand that was 30% less expensive? Could we infer that the majority of people would choose the Toyota?
In order to ensure that the company you are dealing with has the calibre to construct a plant, which fulfils your expectations, be sure to request reference sites for the candidate technology being offered, from the suppliers.
- RECYCLED WATER USE
The most obvious benefit of recycling water is that it conserves potable water, which means that you might potentially save money on both the acquisition and disposal, of potable water. It would be prudent to take this into account while choosing a new STP.
- LOCAL SUPPORT AND SERVICE
When anything fails, who fixes it and where are they located? This is crucial: It will require repair when it breaks. For important equipment, local service is essential.
As you can see, choosing STP correctly requires a lot of time and effort. Focusing on the important factors mentioned above will help you communicate effectively, with your OEMs and increase your chances of choosing the finest STP for your application.
At Netsol Water Solutions, we are committed to providing high-performing sewage treatment systems and plants, to assist industrial enterprises with their water, wastewater, and sewage requirements. We have earned a reputation for providing top-notch service and solutions, which will help our clients lower operating expenses and increase the life of their equipment.
Every purchase of these systems includes free installation, manufacturer’s warranty, and a 24-hour customer service after the sale. You can reach us via phone at +91 9650608473 or drop a mail at firstname.lastname@example.org for additional information.
Keep up with Netsol Water Solutions’ blogs for water/wastewater treatment and air pollution management.