The first step in Grease Interceptor Cleaning is pumping out all the waste grease. A state-of-the-art pump can easily remove the waste grease from the chambers. Once the tank is empty, hydro-jets can blast sludge out of the tank using high-pressure water. The process should be done in a timely manner to avoid damaging your plumbing. After the grease has been pumped out, you can start to wash the sludge.
The frequency of Grease Interceptor Cleaning depends on several factors. The size of the interceptor and the amount of food produced will determine the number of times it needs to be cleaned. It is also important to consider what type of food waste you generate, including animal fats and grease. In addition, a few cities require that you clean the trap every three to six months, depending on how much fat is present in it.
The frequency of Grease Interceptor Cleaning varies depending on the size of the interceptor, the type of waste, and the amount of time that you can devote to cleaning it. Ideally, you should clean your grease trap every 3 to 6 months or after 25% of fat content is present. This means you should perform a thorough grease trap cleaning at least once every three months unless you’ve been using it for a long time.
If you’re wondering how often your grease interceptor needs cleaning, you should know that there are several factors that determine how often it should be cleaned. One of these factors is the size of the interceptor, the amount of waste that accumulates in it, and the type of waste that gets flushed down the toilet. If the FOG is left in the interceptor, it will clog and overflow. This could lead to an overflow and hefty fines. Thankfully, there are several cleaning methods available for your restaurant.
It’s important to regularly clean your grease interceptor. A clean grease interceptor will not only ensure that your business is operating efficiently but will also prevent blockages and overflows. By keeping your interceptor clean, you can avoid these problems by following these guidelines. In addition to this, you’ll also keep the environment safe by employing good practices in cleaning your GRD. If you’re unsure about how often your interceptor should be cleaned, contact a licensed plumber.
Your grease interceptor is made of plastic material. You should use a specialized vacuum cleaner to clean it. It can remove the solids from the bottom of the interceptor. A vacuum will allow you to clean your grease interceptor and maintain its efficiency. You should also consider a vacuum cleaner that has a suction pump for removing the solids. This is the best way to clean a grease interceptor.