Thu. May 23rd, 2024

In the recent energy crisis era, there are mainly two kinds of bulbs being used domestically. The decision is between a compact fluorescent lamp or the light-emitting diode. Both are power effective, but CFL is more proper for a wide spread of light in a broader area.

However, each CFL’s real size is almost many times the size of an LED but is more effective in specific places. If you have CFL’s, then don’t bother; you can easily convert fluorescent to LED with 3 steps.

Points To Keep In Mind Regarding CFL VS LED

  • To collect their applications, we require to see how much we want lighting, and equally, we want the earnings. Typically, CFL is used for the hall, dining areas, balconies, rooms, and lounges. 
  • To have a broader coverage of the illuminated area, the bigger one that is HCL must be selected. LED right now cannot be utilized for the total lighting, as their technology has not reached the position where its global broader extent illumination could be analyzed. 
  • In LED and CFL, the marketplace is there, but usage is different, as the significant constraints are the space and economical budget to support the change.
  • Furthermore, wherever intense light is not the basis but stability, solid light is needed, long term stable association is necessary, and economics plus space limitations are the most proper.
  • Actually, the distinction between the two is cleared. The CFL are much bigger as opposed to a single tube of LED.
  • On high scaled or high ceiling areas, CFLs are more suitable. One of the causes is the wider coverage angle, and besides, it gets protected from daily touching of elements and human flaws. 
  • CFL may crack if restrained to unexpected voltage surge or physical stresses. In contrast, LEDs are not only small but can face the bumps and shocks in a specific capacity.
  • LED technology has long been used for illumination instrument panels, digital time-markers, and traffic lights, which use many LEDs. CFL technology has also been throughout for a while, most generally as the long light bulbs in retail settings such as office structures.

Why LED?

  • LED lighting is available in all of the same tube sizes as conventional fluorescent illumination. With the many advantages of turning out the fluorescents for LED is that the method is approximately simple. 
  • The LED is a high competence bulb that uses less than sixty percent of the intense bulb power. They have excellent color quality and the corresponding color dynamics as their complement.
  • When analyzing the kind of led lighting you want to use in your house or office, it is necessary to consider your investment’s long-term influence. 
  • LEDs also remain significantly higher than CFL bulbs. According to analysis, an LED generally endures between 50,000 and 60,000 hours, while CFL’s average lifespan is around 10,000 hours. 
  • Furthermore, newer LED types have bunches of LEDs making up a singular light, so if one or two LEDs work out, the rest of the light should not be changed.


There is no suspicion that they both give light. Both sources save power and are useful, but essentially due to the light intensity, coverage, and design constraints, each one has its condition in particular defined areas. 

The CFL composition has a curved tube with a small quantity of gas, and mercury surfaced inside the glass tube. But the density of the glass is less than the thickness of the LED lens and glass cover. 

It makes it very unstable and can break quickly. On the opposite hand, the LED is pretty much decisive and can have a lot of rough handling without being destroyed. But they do have a lower life span!

For more information visit !

By kabir

Leave a Reply

Your email address will not be published. Required fields are marked *