Unlike the variable resistor, a resistor has a fixed value, so there’s no risk of overheating the device. This can help reduce power consumption for small circuits, depending on the purpose. You can change the resistance by changing its value. It is worth noting that high values could cause irreparable damage to the resistor. If you have an electrical project that requires high-voltage components, a small value resistor is sufficient.
An resistor is an electrical device which limits the flow of current through it. Tolerance is the manufacturer’s tolerance, expressed as a percentage of actual resistance. Other resistance parameters include stability, temperature coefficient, and thermal conductivity. They are often specified for applications that require high levels of precision. It is important to know the resistive material and its design. Below are some important parameters.
To determine the value of a resistor, look at its color banding. The majority of resistors are made up four different color bands. On the left, you will see significant numbers, while the second and third bands indicate the decimal multiplier. While the fourth band is for tolerance, they both show the value. Every band comes with its own symbol or value. The table below illustrates the different color coding of resistors. These bands have the names of significant figures and are labeled with their values. The third band, with the name “no tolerance,” is always on the right.
You may be required to identify the values of the bands when measuring resistance. The color codes table can be used to determine the resistor’s resistance. A separate piece of paper displays the band values for resistors. If the resistor is color coded, its color bands will display its digit values. To determine the exact value, you can refer to a chart.You can also enter the color through the resistance calculator to get the resistance data
There are several types of resistors. One of the most popular types is the carbon composition resistor. The power rating is what defines its size. An example of a carbon-composition resistance has 22 megohms power rating. The price is high. Remember to keep in mind the component’s resistance by checking its power rating. The current that flows through a carbon composition resistor is too high will cause it to burn. Its voltage rating will depend on the amount of current it can handle.
Resistors are passive components that control the flow of electricity in circuits. The resistor reduces the current and voltage in a circuit. The copper wires are wrapped around a ceramic rod. An insulating paint covers its outer surface. A resistor’s SI unit is an ohm. Two terminals are required for a single resistor.
More electronic calculation tools can use easybom to query